Choosing a comfortable and reliable shower cabin
shower cabins came into our everyday life about twenty years ago, and they seriously compete with the bathtubs and plunge pools that are familiar to us. This is facilitated by various advantages inherent in these particular plumbing products. The cabins take up less space and you can quickly freshen up with economical water consumption. A number of modifications are equipped with additional options that make the procedure even more attractive and practical. The SweetCabinok online store is a convenient way buy a shower cabin in Ukraine.
Pros and cons of shower cabins
Everything is understood in comparison, and we will also look at the individual properties of shower cabins.
The advantages of these designs include:
• You can take a shower immediately, eliminating the need to wait for the water to run, as in the bathtub.
• The most modern cabins make it possible to listen to the radio during the water procedure, receive therapeutic procedures or maintain contact with the outside world through a speakerphone.
• In the cabin there is no need to climb over the large side; you simply need to step over the curb on the pallet.
• The possibility of damage in the booth is small, because the bottom of the tray is made non-slippery. All of them are also equipped with seats and handrails. The device parameters can be selected personally for yourself in a wide range of parameters to make it comfortable to take procedures
• If the unit is equipped with a deep tray, it can be rationally used for preparing laundry for washing or washing a child.
• The shower uses significantly less water than a bath, and your hair rinses much better after using a detergent.
• Cabins are compact, and in small settings they use significantly less floor space than a bathtub. A wide range of designs makes it possible to fit the module into different bathroom conditions.
• Shower stalls are easy to clean because tightly closed doors prevent water from penetrating into the outside space.
At the same time, shower cabins are not without their shortcomings:
• high final cost;
• in the shower stall there is no opportunity to relax and bask in warm water;
• the interdependence of some actions on the water pressure in the water supply system. A problem may be the use of a tropical shower, steam bath or hydromassage treatments;
• the need to wipe the walls of the booth dry after completing each procedure so that a white coating does not appear on it when the moisture usually dries out.
This all explains the need to consider all these factors when ordering this device.
Types of shower cabins
Based on their design features, they are divided into three main types:
• closed;
• open;
• combined.
Closed shower cabins
They are manufactured in the form of an autonomous box, which is installed where it is convenient, where there is a possibility of connecting to communications. The booth consists of a lid, tray and side walls. The components of the equipment include various devices with special functions. The unit is simply dismantled and can be simply removed and easily transported during repairs.
In these devices, stainless steel or acrylic is mainly used for the production of the pallet, although cast iron bases are also found, as well as structures made of sanitary ware. The supporting structure is mainly metallic, made of aluminum or stainless steel. Profile partitions are created translucent or transparent from organic or silicate glass; monolithic polycarbonate is also used, which can easily take on any configuration.
open booths
Models of this option are easily installed in the bathroom. This can be a wall or corner location. Such structures are produced as prefabricated ones. The shower tray is installed on top of the sewer drain. The partitions are placed along its contour, adjacent to the profile of the bathroom. Most often, strengthened silicate or organic glass is used to accomplish this.
A distinctive feature of open booths is the absence of an upper ceiling. Therefore, there is no way to define a cascade or rain shower. During the washing process you only have to use a regular flexible hose with a watering can. Structurally, the open-type cabin can only be used as a way to wash the human body.
Combined designs
Their characteristic feature is the use of a deep tray, most similar to a bathtub. The finishing material for it is stainless steel, acrylic or cast iron. Profile partitions are made from the same materials as the types described above. The possibility of using a top cover depends on the manufacturer’s design decision. This combination makes it possible to combine the best parameters of other types in one design – the installation of a jacuzzi is combined with the option of taking a Charcot shower, tropical or cascade version.
It follows that the fundamental factor influencing the choice of a shower stall is undoubtedly the budget. Based on this indicator, dimensions are selected that match the size of the room. Other conditions are considered after the first two are considered. Only with all the abundance of offers, the choice may depend on the assortment list of these products on the local market.
The perfection of shower cabin designs makes it possible to install them yourself from a set of purchased parts. Before starting work, carefully study the manufacturer’s installation recommendations. Only then should you proceed with installation. If a complex design is used, and unclear points arise, it is preferable to postpone this event and entrust its implementation to invited professionals.
