Gel polish PINK COCOA

A unique line of cosmetics from the company “OXXI Professional” gives lovers of creative manicure luxurious shades of coverage. The OXXI Professional product range includes 170 gel polishes and professional preparations for easy and convenient use of the coating.

Thanks to the use of these products, your nails will be reliably protected from accidental damage, and a chic and durable manicure with a bright gloss will become your calling card.

Advantages of coverage:

• dazzling shine;

• durability over twenty days;

• not subject to shrinkage, chipping, cracking;

• drying in LED/UV devices.

How to cover?

The sequence of applying gel polish occurs sequentially:

1. If necessary, do a hygienic manicure: file your nails, give the plate the desired shape.

2. Using a lint-free cloth with a degreasing and dehydrating agent, clean the surface of the nails from dust, grease, and excess moisture.

3. For soft or peeling nail plates, for the purpose of additional adhesion, apply a special bonder to their surface and dry for up to 20 seconds.

4. Apply a thin layer of base coat to the nail plate under the gel polish.

5. Seal the free side.

6. Polymerize for a couple of minutes in an ultraviolet lamp or 30 seconds in an LED device.

7. Apply Gel polish OXXI No. 069 PINK COCOA or other color coating to the surface of the nails, seal the free part, polymerize each layer for a couple of minutes in an ultraviolet lamp or thirty seconds in an LED device.

8. In case of poor installation of colored gel polish, it is advisable to remove the sticky layer with a dry gel brush or a lint-free cloth with a special liquid for removing the layer.

9. Repeat the procedure, seal the free part and repeat the polymerization (in an ultraviolet lamp for up to three minutes or in an LED device for up to 60 seconds).

10. Remove the sticky layer with a damp cloth.

11. Cover the cuticles with nail oil.

How to make a withdrawal?

The technological process of removing the coating is performed in the following sequence:

1. Remove the gloss by treating the gel polish with a nail file or a rough buff so that the remover can better penetrate inside and effectively remove the gel polish.

2. Place a sponge soaked in remover on the nail and seal with foil.

3. Remove the application after ten minutes, slowly removing the gel polish using an orange stick. If you can’t remove the coating right away, duplicate the procedure by sealing the nail in foil for a couple of minutes.

4. Polish the plate with a sanding pad or nail file. If re-coating is not planned, polish with nail oil.